? semiconductor components industries, llc, 2001 november, 2001 rev. 2 1 publication order number: bc307/d bc307b, bc307c amplifier transistors pnp silicon maximum ratings rating symbol value unit collector-emitter voltage v ceo 45 vdc collector-base voltage v cbo 50 vdc emitter-base voltage v ebo 5.0 vdc collector current e continuous i c 100 madc total device dissipation @ t a = 25 c derate above 25 c p d 350 2.8 mw mw/ c total device dissipation @ t c = 25 c derate above 25 c p d 1.0 8.0 watts mw/ c operating and storage junction temperature range t j , t stg 55 to +150 c thermal characteristics characteristic symbol max unit thermal resistance, junction to ambient r q ja 357 c/w thermal resistance, junction to case r q jc 125 c/w device package shipping ordering information bc307b to92 http://onsemi.com case 29 to92 style 17 5000 units/box 3 2 1 bc307brl1 to92 2000/tape & reel collector 1 2 base 3 emitter bc307bzl1 to92 2000/ammo pack bc307c to92 5000 units/box
bc307b, bc307c http://onsemi.com 2 electrical characteristics (t a = 25 c unless otherwise noted) characteristic symbol min typ max unit off characteristics collectoremitter breakdown voltage (i c = 2.0 madc, i b = 0) v (br)ceo 45 e e vdc emitterbase breakdown voltage (i e = 100 adc, i c = 0) v (br)ebo 5.0 e e vdc collectoremitter leakage current (v ces = 50 v, v be = 0) (v ces = 50 v, v be = 0) t a = 125 c i ces e e 0.2 0.2 15 4.0 nadc m a on characteristics dc current gain (i c = 10 m adc, v ce = 5.0 vdc) bc307b bc307c (i c = 2.0 madc, v ce = 5.0 vdc) bc307 bc307b bc307c (i c = 100 madc, v ce = 5.0 vdc) bc307b bc307c h fe e e 120 200 420 e e 150 270 e 290 500 180 300 e e 800 460 800 e e e collectoremitter saturation voltage (i c = 10 madc, i b = 0.5 madc) (i c = 10 madc, i b = see note 1) (i c = 100 madc, i b = 5.0 madc) v ce(sat) e e e 0.10 0.30 0.25 0.3 0.6 e vdc baseemitter saturation voltage (i c = 10 madc, i b = 0.5 madc) (i c = 100 madc, i b = 5.0 madc) v be(sat) e e 0.7 1.0 e e vdc baseemitter on voltage (i c = 2.0 madc, v ce = 5.0 vdc) v be(on) 0.55 0.62 0.7 vdc dynamic characteristics currentgain e bandwidth product (i c = 10 madc, v ce = 5.0 vdc, f = 100 mhz) f t e 280 e mhz common base capacitance (v cb = 10 vdc, i c = 0, f = 1.0 mhz) c cbo e e 6.0 pf noise figure (i c = 0.2 madc, v ce = 5.0 vdc, r s = 2.0 k w , f = 1.0 khz) nf e 2.0 10 db 1. i c = 10 madc on the constant base current characteristic, which yields the point i c = 11 madc, v ce = 1.0 v.
bc307b, bc307c http://onsemi.com 3 typical characteristics 2.0 1.5 1.0 0.2 0.3 0.5 0.7 -200 -0.2 -0.5 -1.0 -2.0 -5.0 -10 -20 -50 -100 i c , collector current (madc) figure 1. normalized dc current gain h fe , normalized dc current gain v ce = -10 v t a = 25 c -1.0 -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0 -0.1 i c , collector current (madc) figure 2. asaturationo and aono voltages v, voltage (volts) t a = 25 c v be(sat) @ i c /i b = 10 v be(on) @ v ce = -10 v v ce(sat) @ i c /i b = 10 400 20 30 40 60 80 100 200 300 i c , collector current (madc) figure 3. currentgain e bandwidth product f t , current-gain bandwidth product (mhz) c, capacitance (pf) 10 1.0 2.0 3.0 5.0 7.0 -0.4 v r , reverse voltage (volts) figure 4. capacitances t a = 25 c c ib c ob r b , base spreading resistance (ohms) 150 140 130 120 110 100 i c , collector current (madc) figure 5. output admittance -0.2 -0.5 -1.0 -2.0 -5.0 -10 -20 -50 -100 v ce = -10 v t a = 25 c -0.5 -1.0 -2.0 -3.0 -5.0 -10 -20 -30 -50 -0.6 -1.0 -2.0 -4.0 -6.0 -10 -20 -30 -40 1.0 i c , collector current (madc) figure 6. base spreading resistance v ce = -10 v f = 1.0 khz t a = 25 c -0.1 -0.2 -0.3 -0.5 -1.0 -2.0 -3.0 -5.0 -10 v ce = -10 v f = 1.0 khz t a = 25 c -0.1 -0.2 -0.5 -1.0 -2.0 -5.0 -10 0.01 0.03 0.05 0.1 0.3 0.5 h , output admittance (ohms) ob 150
bc307b, bc307c http://onsemi.com 4 package dimensions to92 (to226) case 2911 issue al notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. 3. contour of package beyond dimension r is uncontrolled. 4. lead dimension is uncontrolled in p and beyond dimension k minimum. r a p j l b k g h section xx c v d n n xx seating plane dim min max min max millimeters inches a 0.175 0.205 4.45 5.20 b 0.170 0.210 4.32 5.33 c 0.125 0.165 3.18 4.19 d 0.016 0.021 0.407 0.533 g 0.045 0.055 1.15 1.39 h 0.095 0.105 2.42 2.66 j 0.015 0.020 0.39 0.50 k 0.500 --- 12.70 --- l 0.250 --- 6.35 --- n 0.080 0.105 2.04 2.66 p --- 0.100 --- 2.54 r 0.115 --- 2.93 --- v 0.135 --- 3.43 --- 1 style 17: pin 1. collector 2. base 3. emitter on semiconductor and are trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. atypicalo parameters which may be provided in scill c data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating parameters, including atypicalso must be validated for each customer application by customer's technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body , or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthori zed use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. publication ordering information japan : on semiconductor, japan customer focus center 4321 nishigotanda, shinagawaku, tokyo, japan 1410031 phone : 81357402700 email : r14525@onsemi.com on semiconductor website : http://onsemi.com for additional information, please contact your local sales representative. bc307/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 3036752175 or 8003443860 toll free usa/canada fax : 3036752176 or 8003443867 toll free usa/canada email : onlit@hibbertco.com n. american technical support : 8002829855 toll free usa/canada
|
